FedBizOpps banner

Login to begin searching the FBO/CBD
Home Page
CBD/FBO Online
About Us
Contact Us
No. Notes

Popular Searches

Popular Categories

Custom Rubber Marine Fenders wWith Steel Mounting Brackets - Solicitation

General Information

Document Type:PRESOL
Posted Date:Aug 25, 2017
Category: Nonmetallic Fabricated Materials
Set Aside:N/A

Contracting Office Address

Department of Transportation, St. Lawrence Seaway Development Corporation (SLSDC), SLSDC Headquarters, P.O. Box 520, 180 Andrews Street, Massena, New York, 13662


Specification Drawings Solicitation SLSDC intends on purchasing custom fabricated rubber marine fenders with steel mounting brackets. The fender elements shall be molded of a natural, butyl or EPDM rubber, which is compounded to provide satisfactory resistance to aging, water exposure, weathering, fatigue and abrasion. Utilization of polyisoprene may be accepted if the fenders meet the below requirement. The material shall be uniform in quality and free from any contamination, cracks or defects that could be detrimental to the usefulness or performance of the fender. The rubber fender material shall be suitable for service in ambient temperatures of -40 ° F to +100 ° F and shall meet the following requirements: Property Testing Standard Condition Requirement Tensile Strength ASTM D412 Die C Original 16 Mpa (Min) Aged for 96 hours at 70° C 12.8 Mpa (Min) Elongation at Break ASTM D412 Die C Original 400% (Min) Aged for 96 hours at 70° C 320% (Min) Hardness ASTM D2240 Original 78° (Max) Shore A Aged for 96 hours at 70° C Original Value + 6° Points increase Compression Set ASTM D395 Aged for 22 Hours at 70° C 30% (Max) Tear Resistance ASTM D624 Die B 70 kN/m (Min) Ozone Resistance ASTM D1149 1 ppm at 20% Strain at 40° C for 100 Hours No cracking visible by eye. The fender bracket material shall be ASTM A-36 or better structural steel plate and workmanship shall be in acordance with industry standards.

Original Point of Contact

POC Steven P. Latulipe, Phone: 3157643260, Patricia L. White, Phone: (315) 764-3236

Place of Performance

251 Fregoe Road, Massena, New York, 13662, United States
Link: FBO.gov Permalink
Bookmark This Notice
Print View