CBD-NET.com | Search | Subscribe to receive Updated Notices | Non-Print Version

Fish Cleaning Grinding Station - W912DQ-17-T-1039 Combined Synopsis and Solicitation 20170708

Fish Cleaning Grinding Station - W912DQ-17-T-1039 Combined Synopsis and Solicitation 20170708

General Information

Document Type:PRESOL
Posted Date:Jul 08, 2017
Category: Special Industry Machinery
Set Aside:N/A

Contracting Office Address

Department of the Army, U.S. Army Corps of Engineers, USACE District, Kansas City, Attn: CENWK-CT, 635 Federal Building 60l East 12th Street, Kansas City, Missouri, 64106-2896, United States

Description

Request for Quotes SYNOPSIS / SOLICITATION: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, proposals are being requested and a written solicitation will not be issued. The solicitation number for this acquisition is W912DQ-17-T-1039 and it is being issued as a Request for Quotes (RFQ). Scope of Work The fish cleaning/grinding station shall come complete with all components required to make it fully operational, needing only to be set in place and have the utilities connected to it. The station shall be at least five feet wide by eight feet long with ¾" thick Sanalite cutting boards including a side mounted 60" x 19" x 34" high ADA compliant cutting table. The grinder and all main utility connections shall be protected by door(s) or panel(s) capable of being locked. Station Specifications: • Four automatic basin flush nozzles • A minimum of four overhead attached 60" water rinse hoses with timed, automatic shut offs attached to the cleaning table. • Two standard water faucets located one at each end of the cleaning table for general cleaning purposes. • A minimum of two 110v, GFCI minimum 15-amp waterproof electrical outlets which meets ADA requirements • The waste disposal dual grinder inlet chute inlet shall be protected to prevent people from reaching into it or placing large items such as rocks into it. Proper warning decals/placards hall be in place. • Table surface shall be plastic or composite material for cleaning fish. • This station will have a minimum 1 year manufacturer warranty • This fish cleaning/grinding station table shall utilize a side access for ADA accessibility. Grinder Specifications: The station shall utilize a two shaft, low speed, high torque, waste water solid grinder unit. The Grinder unit shall be an ‘open channel type with a cutter size of at least 4.5 inches discharging into a 6" drain line. The grinder heads shall be secured, but removable with the proper wrenches/key for onsite maintenance or replacement. Grinder shall be powered by 2HP, 240-volt, 3-phase motor with single phase hook-up capability. A single to three phase converter must be provided with this unit to match the motor and the single phase 240-volt supply at site. Grinder shall be capable of grinding and disposing of whole catfish weighing a minimum of 10 lbs. Station shall have NEMA Control Panel with off delay adjustable 1 to 10 minutes and adjustable post water flow timer up to 1 minute. System shall utilize 2 counter rotating 60 rpm 2 hardened hex drive shafts with hardened tooth cutters designed to minimize being jammed or plugged with fish or other introduced material.

Original Point of Contact

POC Christopher W. Anderson, Phone: 8163893850

Place of Performance

Address:
Harlan County Lake Admin Office, 70788 Corps Road A, Republican City, Nebraska, 68971, United States
68971,
Link: FBO.gov Permalink
Bookmark This Notice